This article will help you reset your devices so that they can be paired with your system.


Reset your device so that it can be paired with your system. The reset procedure varies slightly on your device.


Reset Oomi Bulb

  1. Turn Oomi Bulb on using your switch
  2. Turn the light off and on 6 times quickly
  3. When reset properly, Oomi Bulb should start a smooth color cycle

Reset Other Oomi Devices
  1. Make sure your device has power
  2. Find the device's physical button
  • Oomi Plug: The round divot on the front of Oomi Plug just inside of the LED ring
  • Oomi Door and Window Sensor: Located on the back of the device
  • Oomi MultiSensor: The round divot on the back of the device (It should click when pressed)
  • Press and hold for 20 seconds until the status LED turns green. (The LED will first turn yellow, then purple, then flashing red, then a faster flashing red before turning green)